OVERSITE™
OVERSITE™
OVERSITE™ empowers fuel marketers and convenience store operators with the ability to monitor critical site equipment for outages and to perform restorative remote resets, maximizing uptime across the forecourt and store by resolving common outage issues before they turn into extended downtime.
When a dispenser, pump, or site controller goes offline, the traditional response is a service call. OVERSITE™ gives operators remote visibility into device power status and the ability to cycle assets back online without sending a technician.
RAPID OUTAGE RECOVERY | AVOID EXTENDED DOWNTIME | REDUCE MAINTENANCE COST.
Reset offline dispensers in minutes instead of hours
Recover from power outages, no technicians required
Restart fuel pumps without a maintenance trip charge
Restore digital signage, no maintenance visit required
Fix point of sale outages, zero on-site staff involvement
Expedite site restarts after E-stop engagement
With OVERSITE™ remote monitoring and power cycling capabilities, C-Store operators can remotely reset fuel dispensers, site controllers, submersible pumps, and more; significantly reducing the need for costly on-site maintenance trips and eliminating the expenses associated with extended downtime.
Monitor Power Status
Gain remote visibility into the power status of connected dispensers, pumps, controllers, signage, and more.
Power Cycle & Reset Assets
Remotely reboot and reset downed or non-functioning assets to restore functionality.
Boosted Performance
Remotely monitor for E-stops or shut down power to all fuel system equipment in the event of an emergency.
Automated Alerts
Receive email and SMS notifications for system events, asset power outages, or E-Stop activations.
Track & Report
Log event history, outages, and power cycles to generate custom reports for troubleshooting and compliance.
Automated Sequencing
Pre-programmed power cycle sequencing automates powering on/off complex systems in a specified cadence.
As reported by a top US C-store operator, it is estimated that up to 80% of their on-site service calls for equipment outages simply required a common power cycle reset to bring their equipment back online. OVERSITE™ facilitates remote power cycling to minimize truck rolls and reduce asset downtime.
With early notification of power outages, equipment failures, and E-Stop engagements, remote power cycling allows operators to reset assets quickly, avoid the wait for a technician to arrive, and mitigate the impacts of downtime on business.
Remote power cycling can significantly decrease or eliminate the need for service truck rolls, leading to substantial cost savings and faster recovery times.
Improve asset outage troubleshooting, minimize on-site personnel involvement, and allow technicians to focus on planned activities versus unplanned ones. Maximize workforce efficiency and response times with remote power cycling.
Monitor site equipment for power-related outages in near real-time with device power status monitoring, outage notifications, and automated response triggers for timely responses to site-specific issues.
From remote regions to high-traffic urban sites, fuel marketers are leveraging OVERSITE™ to solve real operational challenges. The examples on the following pages highlight how remote power monitoring, resetting, and sequencing capabilities help reduce downtime, cut maintenance costs, and keep critical systems running smoothly.
RESET OFFLINE DISPENSERS IN MINUTES INSTEAD OF HOURS
Dispensers lose communication with the controller after an internet outage causing them to lock up and prevent fueling. Customers cannot fuel their vehicles and drive off to a competitor, impacting fuel sales and convenience store purchases.
THE POWER OF OVERSITE™
OVERSITE™ remote power cycling resets dispensers in minutes instead of hours waiting for a maintenance technician to arrive.
NO MAINTENANCE CALL.
MINIMAL DOWNTIME.
RECOVER FROM POWER OUTAGES, NO TECHNICIAN REQUIRED
A power outage hits overnight or during off-hours, and the site doesn't restart properly when power returns. Pumps, dispensers, and POS systems stay down until morning, losing early commuter traffic and breakfast/coffee sales.
THE POWER OF OVERSITE™
OVERSITE™ pre-programmed power sequencing automatically restarts equipment in the right cadence to avoid errors and get the site operational sooner
WHEN OUTAGES HIT,
BOUNCE BACK QUICKLY.
RESTART FUEL PUMPS WITHOUT A MAINTENANCE TRIP CHARGE
A temporary grid fault or power surge takes the submersible fuel pumps offline, shutting down dispensers and grinding sales to a halt. Customers cannot fill vehicles and revenue across the forecourt and in the store sit idle until a technician can arrive on site.
THE POWER OF OVERSITE™
OVERSITE™ monitors pump power status and remotely cycles power to restart the system without having to wait for a technician.
NO FUEL. NO SALES.
KEEP BUSINESS FLOWING.
RESTORE DIGITAL SIGNAGE, NO MAINTENANCE VISIT REQUIRED
A common signage controller communication issue causes the site's digital signage to freeze, go blank, or show the wrong prices. Pricing isn't visible from the road, the store appears closed, and potential customers skip the station for the one next door.
THE POWER OF OVERSITE™
OVERSITE™ remotely power cycles devices like controllers and individual signage in sequence to restore them fast and without a maintenance call to the site.
KEEP EVERY CUSTOMER.
SKIP THE MAINTENANCE CALL.
FIX POINT OF SALE OUTAGES, ZERO ON-SITE STAFF INVOLVEMENT
POS terminals in the convenience store lose power intermittently due to a power surge or communication error. Convenience store sales grind to a halt, no card payments, no food ordering, no sales.
THE POWER OF OVERSITE™
OVERSITE™ remote power cycling resets POS controllers and terminals in the proper sequence without c-store staff involved or having to call a maintenance technician.
MINIMIZE SALES DOWNTIME.
NO TECHNICIAN REQUIRED.
EXPEDITE SITE RESTART AFTER EMERGENCY STOP ENGAGEMENT
The entire forecourt goes dark after an emergency stop (E-Stop) is accidentally hit or triggered by a minor incident. Fueling stops completely until a technician is present to physically reset all system equipment in the correct order, often taking hours.
THE POWER OF OVERSITE™
OVERSITE™ detects E-Stop events and facilitates complex system resets remotely, minimizing downtime and eliminating the need for a maintenance call.
RECOVER FROM E-STOPS,
WITHOUT THE WAIT.
OVERSITE™ is an advanced remote monitoring and control technology built into the Power Integrity™ Remote Control Solution (RCS) and powered by an EVO™ Series console.
REMOTE CONTROL SOLUTION
The RCS serves as a single fuel control panel that combines all required NEC® protection, emergency-stop, and disconnect functionality for dispensers, pumps, low-voltage data, and auxiliary devices. OVERSITE™ leverages these essential power connections to provide real-time power status monitoring and enable quick remote resets or automated responses when issues occur.
EVO™ SERIES INTEGRATION
Integrating the EVO™ Series enhances OVERSITE™ capabilities with sensor/time-driven event response automation and delivers deeper visibility into site conditions and automated control capabilities for proactive responses to site conditions.
LEARN MORE
Featured
brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-1070 OVERSITE Enhanced Uptime Brochure.pdf | 16.6 MB |
catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-1028 2025 UL Ordering Catalog.pdf | 95.28 MB |